Microsoft KB Archive/100312

From BetaArchive Wiki
Knowledge Base


Error messages during boot Sequence on Intel x86 machines

Article ID: 100312

Article Last Modified on 11/1/2006



APPLIES TO

  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.1
  • Microsoft Windows NT Advanced Server 3.1
  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition



This article was previously published under Q100312

SUMMARY

The following error messages may be displayed during the boot process of Windows NT on an Intel x86 machine. Error messages are listed with possible causes and resolutions.

Error Messages During Boot Sequence

BOOT: Couldn't find NTLDR Please insert another disk.

The NTLDR program has been deleted from the boot drive or is not located in the root directory.


Error Opening NTDETECT Press any key to continue

The NTDETECT program has been deleted from the boot drive or is not located in the root directory.

-or-

The timeout option for the Boot Loader in the BOOT.INI file may be set to 0.

-or-

The path of the default operating system in the Boot Loader section of the BOOT.INI file is different than any of the paths listed in the [operating systems] section.


OS Loader V2.10
The system did not load because of a computer disk hardware configuration problem.
Could not read from the selected boot disk. Check the boot path and disk hardware.
Please check the Windows NT documentation about hardware disk configuration and your hardware reference manuals for additional information. Boot failed.

The device or partition component of a path is incorrect in the [operating systems] section of the BOOT.INI file.


OS Loader V2.10
loading file
multi(0)disk(0)rdisk(0)partition(1)\winnx\system\ntoskrnl.exe
The system did not load because it cannot find the following file: <sysroot>\SYSTEM32\NTOSKRNL.EXE
Please reinstall a copy of the above file.
Boot failed.

The directory component of the path is incorrect in the [operating systems] section of the BOOT.INI file.

-or-

Ensure that both NTLDR and BOOT.INI are in the system root directory on the bootable logical drive.


Couldn't open boot sector file
multi(0)disk(0)rdisk(0)partition(1)\bootsect.dos

The BOOTSECT.DOS file is lost or damaged. The only way to restore this file is from a backup. This file contains information about the physical heads, tracks, and cylinders and partition table information; it is unique to each machine.


Additional query words: prodnt

Keywords: kbother KB100312