BetaArchive Logo
Navigation Home Screenshots Image Uploader Server Info FTP Servers Wiki Forum RSS Feed Rules Please Donate
UP: 30d, 10h, 23m | CPU: 21% | MEM: 5926MB of 10882MB used
{The community for beta collectors}

Post new topic Reply to topic  [ 6 posts ] 
Author Message
 PostPost subject: Problems installing Chicago 58s        Posted: Thu Oct 25, 2007 12:16 am 
Reply with quote
Hi everyone,

I'm having a bit of difficulty installing and running Chicago 58s. My current setup is this:

VMware, with DOS 6.22, Windows 3.11 installed. I pop in the Chicago CD and run setup.exe...it asks me about installing the extras, I say "yes", and then it proceeds to copy all the files and restart the VM. I then see the Chicago boot screen, but instead of proceeding to windows, I get a screen with a line of garbled text, and the VM hangs at this point.

I'm not sure if the issue is related to the software configuration on my VM (I'm relatively new to this, so I'm not sure if DOS 6.22 and Chicago 58s "go together", so to speak), or if it is related to the video settings (set to default VGA, which 3.11 runs fine with).

If I was too vague with anything, or if you need more details regarding my setup, just let me know. Thanks in advance.


Top
 PostPost subject:        Posted: Thu Oct 25, 2007 4:19 am 
Reply with quote
Donator
User avatar
Offline

Joined
Sat May 12, 2007 1:05 pm

Posts
5271

Location
The Collection Book

Favourite OS
Windows & Phone
EDIT:

Just checked my copy of chicago, you must use the BOOTDISK provided in the .RAR check this readme:

[quote]
This build of Chicago 58s has been fixed by KenOath. When the setup
is complete it will say that it wants to edit both the Autoexec.bat
file + the Config.sys file on your boot floppy. Just click cancel &
the installation will then finalise soon after the network files are
installed.It will boot first go with 90 files & buffers in the
config.sys file.

The only trouble I had after install was if the motherboard was too
late a model or if the video card was too late. Most isa video cards
work perfect, but another note to remember is don't change any video
settings whatsoever,it'll crash the system on restart - that is unless
you find drivers for the card that are accepted by the system.

On first reboot when it asks for your Beta-site ID - any six numbers
will work.

if you want to run the MS-Dos prompt within windows you'll get an error
message about not having a Program Information File properties icon
-or pif properties, dont worry just click ignore & run & now a pif
icon has been produced.

I could have made 58s install with CD-Rom support but every driver I
tried just slowed the system down + after spending 4 days & nights I
figured it was'nt worth it . If you find a cd-driver that is
compatible i'd love to here about it.

Be sure to use the Boot-disk I supply with this Fix & you should'nt
have any problems at all.

Cheers to all the beta buffs out there . Enjoy ! ...KenOath...
[/qoute]

But change the time anyway to be sure.

Code:
Did you changed the [b]BIOS[/b] time.

Just click [b]F2[/b] and then change the time.
In VMWare it holds the time when booting.

If you use Virtual PC you must change a line of code the hold the time
otherwise it resets.

_________________
Image
http://www.thecollectionbook.info
Subscribe to our Image for updates and like us on Image.

Reading Mode only, PM's possible.


Top  Profile  WWW
 PostPost subject:        Posted: Thu Oct 25, 2007 7:37 am 
Reply with quote
Thanks, DjRob. I'm not sure if the version I downloaded came with its' own bootdisk, but I will check later today and report any progress I've made.


Top
 PostPost subject:        Posted: Thu Oct 25, 2007 7:43 am 
Reply with quote
Donator
User avatar
Offline

Joined
Sat May 12, 2007 1:05 pm

Posts
5271

Location
The Collection Book

Favourite OS
Windows & Phone
You have enough post, apply at the memberslist en if accepted download it from the FTP, there it will have the bootdisk.

_________________
Image
http://www.thecollectionbook.info
Subscribe to our Image for updates and like us on Image.

Reading Mode only, PM's possible.


Top  Profile  WWW
 PostPost subject:        Posted: Tue Feb 12, 2008 6:00 am 
Reply with quote
I'm not yet a true member but just out of curiosity:

Is this bootdisk a floppy image that boots up some sort of 3rd party made system to get the install working from a CD image or is it something made by Microsoft employees back in the day?


Top
 PostPost subject:        Posted: Tue Feb 12, 2008 10:12 am 
Reply with quote
Donator
User avatar
Offline

Joined
Sat May 12, 2007 1:05 pm

Posts
5271

Location
The Collection Book

Favourite OS
Windows & Phone
No the most are original bootdisk and otherwise you can use an normal windows bootdisk.
They work just like Windows 98 Bootdisk, The load a few files and generic CD-ROM drivers for to begin the install from the cd-rom

_________________
Image
http://www.thecollectionbook.info
Subscribe to our Image for updates and like us on Image.

Reading Mode only, PM's possible.


Top  Profile  WWW
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 




Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  

All views expressed in these forums are those of the author and do not necessarily represent the views of the BetaArchive site owner.

Powered by phpBB® Forum Software © phpBB Group

Copyright © 2006-2018

 

Sitemap | XML | RSS