completely installed chicago
Page 1 of 1

Author:  dean corso [ Wed Jul 09, 2008 10:46 am ]
Post subject:  completely installed chicago

can anyone please post a installed version of
windows chicago 58s

thank you

Author:  mdogg [ Wed Jul 09, 2008 11:18 am ]
Post subject: 

What kind of preinstalled? Bochs, Virtual PC, VMware, etc.

Author:  Tootles [ Sun Jul 13, 2008 2:32 pm ]
Post subject: 

It's on my site. It's for VirtualPC.

Author:  KenOath [ Mon Jul 14, 2008 5:00 pm ]
Post subject: 

Rather than waste time starting another thread, I've dug out the VHDs I
have of 58s, {my last fix before OSBA closed, never released} 73g & 81...
73g has CD-rom support 58s & 81 doesn't...
It looks like I included the vmc's with each rarred package...
These were made on VPC 2004 Sp1...
Shall I up them all to a server here... or just the 73g, seeing marktuson
asked for it in a PM...

Author:  Tootles [ Mon Jul 14, 2008 6:21 pm ]
Post subject: 

Just the 81 one, if that's OK. That way (if it's alright with you) I can put it on the website for future reference. It might save you a bit of effort, and I will, of course, give you the credit for the file. Is that OK?


Author:  KenOath [ Mon Jul 14, 2008 7:20 pm ]
Post subject: 

Here's the download of the build 81 VHD from VPC 2004 Sp1..

Author:  Tootles [ Mon Jul 14, 2008 8:15 pm ]
Post subject: 


Author:  dean corso [ Tue Jul 15, 2008 8:38 am ]
Post subject: 

Sorry for late replying - forgot this topics

I mant a preinstalled Chicago in DOS. So no image or something like that.
Just the installed Folder.


Author:  Betaliker111 [ Tue Jul 15, 2008 10:05 am ]
Post subject: 

And can someone have a pre-installed version of Chicago build 224 and 324 German? In Virtual PC.

Author:  Tootles [ Tue Jul 15, 2008 11:42 am ]
Post subject: 

dean corse: Why? It won't work if you try and run it through DOS. Download the VHD file and open it in WinImage, then you can extrct any files you want from it.

Betaliker111: As far as I can see Chicago 224 is broken. It's missing the setup's system files, though it could possibly(?) be fixed by putting the 224 cabinet files onto a slightly earlier setup disc... Opinions?

Author:  Daniel [ Tue Jul 15, 2008 12:10 pm ]
Post subject: 

I have a working copy of Chicago 224 - if needed I can upload it later...

Author:  Tootles [ Tue Jul 15, 2008 3:29 pm ]
Post subject: 

Do you have a full set of install files for 224? The ones on the server are, as I said, incomplete, but I'd like to set it up myself.

Author:  dean corso [ Thu Jul 17, 2008 9:01 am ]
Post subject: 

Thank you matuson. I downloaded you VPC image. But how do I get the files out of this image (without tonns of disks)


Author:  Rob Jansen [ Thu Jul 17, 2008 9:26 am ]
Post subject: 

That VPC image is ready to boot.

But you can extract files.
Open it with WINIMAGE 8.0 or higher.

Author:  mdogg [ Thu Jul 17, 2008 9:41 am ]
Post subject: 

Yes, WinImage will do the job for extracting from disk images.

However WinRAR is able to open some archives.

Author:  Rob Jansen [ Thu Jul 17, 2008 9:57 am ]
Post subject: 

Some archives but nog .vhd's.

The Hard Drive images.

Author:  Tootles [ Thu Jul 17, 2008 10:34 pm ]
Post subject: 

Open the VHD file in WinImage, and them press <CTRL> + X to extract to any folder of your choice.

Author:  mdogg [ Thu Jul 17, 2008 11:48 pm ]
Post subject: 

I use WinImage mainly for the ability to add boot sectors to images. Then I can burn/write them to a disk of some sort and then I can use it on a real PC without the need of an extra boot disk.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group