AMI 386 Clone
8 MB of RAM
20 MB Hard Drive
The setup hang when format the partition , but I configured the BIOS properly . Here is the error code :
Are there any solution to solve this problem ?
OS/2 1.1 installation problem on PCem
OS/2 1.1 installation problem on PCem
I've tried to installed OS/2 1.1 AST OEM in PCem with this configuration :
AMI 386 Clone
8 MB of RAM
20 MB Hard Drive
The setup hang when format the partition , but I configured the BIOS properly . Here is the error code :
Are there any solution to solve this problem ?
AMI 386 Clone
8 MB of RAM
20 MB Hard Drive
The setup hang when format the partition , but I configured the BIOS properly . Here is the error code :
Are there any solution to solve this problem ?
-
yourepicfailure
- Donator
- Posts: 1317
- Joined: Mon Jul 23, 2012 9:40 pm
- Location: Lufthansa DC-10
Re: OS/2 1.1 installation problem on PCem
Looks like something went wrong with the floppy while it was formatting. Try a different img, different emulator, or just do it again.
"C makes it easy to shoot yourself in the foot; C++ makes it harder, but when you do it blows your whole leg off"
You will never tear me from the grasp of the Pentium M!
-
TheCollector1988
- Donator
- Posts: 3604
- Joined: Wed Feb 23, 2011 12:11 am
- Location: Italy
- Contact:
Re: OS/2 1.1 installation problem on PCem
It's a known problem when formatting the hdd directly with OS/2 1.x' tools, just use MS-DOS 3.x or 5.x to partition and format the hdd on PCem if you really want to use OS/2 1.1.